Standard Custom Hydraulic Cylinder

The most common hydraulic cylinder type; these cylinders can be either single acting or double acting. The popularity of this cylinder is due to its simple design and wide range of customization features.

DOUBLE-ACTING CUSTOM HYDRAULIC CYLINDER

This custom hydraulic cylinder is powered in both extend and retract. A double-acting cylinder has been used in various applications where a load needs to be lifted, which means the cylinder is powered in extend. In addition, there may be a load “pulling” on the cylinder after it has been extended, which means the cylinder needs to be powered in retract. This type of custom hydraulic cylinder has been used to extend and retract an outrigger to stabilize an aerial fire apparatus or other piece of mobile equipment. (Ref. 700-55750)

DOUBLE-ACTING CUSTOM HYDRAULIC CYLINDER

• Specializing in P.O. Check, Counterbalance, Direct-Acting Relief and Solenoid Valves integral to the hydraulic cylinder end cover or valve block.
• Hydraulic cushions available for both full extend and full retract.
• High-pressure rod and piston seals available to handle the most challenging cylinder applications.
• Heavy Duty Welded Construction
• Operating Pressures up to 5000 PSI.
• Bore Sizes from 1.25” to 16.00” .
• Chromed, Ground & Polished Piston Rod.
• Threaded-in Ductile Iron Piston & Pack Head.
• Honed Tubing
• Various Mounting Arrangements Include D-Pivot, Pin Eye, Clevis, Mounting Foot & Trunnion.

SINGLE-ACTING CUSTOM HYDRAULIC CYLINDER

This custom hydraulic cylinder is typically powered in extend only. A single-acting cylinder has been used in various applications where a load needs to be lifted and the weight of the load allows the cylinder to retract. This type of custom hydraulic cylinder has been used to raise a conveyor in an underground mining machine. (Ref. 500-33550)

SINGLE-ACTING CUSTOM HYDRAULIC CYLINDER

• High-pressure rod and piston seals available to handle the most challenging cylinder applications.
• Vented Wear Band Design Available for Piston (Eliminates need for bleeder vent!)
• Heavy Duty Welded Construction
• Operating Pressures up to 5000 PSI.
• Bore Sizes from 1.25” to 16.00” .
• Chromed, Ground & Polished Piston Rod.
• Threaded-in Ductile Iron Piston & Pack Head.
• Honed Tubing
• Various Mounting Arrangements Include D-Pivot, Pin Eye, Clevis, Mounting Foot & Trunnion.